Here is How to Connect PS3 Controller without USB

PS3 is a gaming console that many have dreamed of and it is really a good choice for gamers. Most of PS3 players are looking forward to know how to sync ps3 controller without USB. Well, in this article we’ve covered everything that you need to know. Another of the world’s best-selling games from Sony is PlayStation 3 or PS3. You are in the right position if you want to learn the response to this specific question, how to connect ps3 controller without USB. And we will discuss with you all the ins and outs of the PS3 remote.

How many ways will your PS3 controller are connected?

As PlayStation 3 was released earlier in the day, it had several different apps. Perhaps the apps don’t impress you right now. Yet it was a success at that time. We’re already on the edge of PlayStation 5. And since then, Sony’s come a long way.

Far from it, there are two ways to attach your controller PlayStation 3 to your computer. Yeah, you can use a cable or even without your PS3 console to attach your DS3 device. Bluetooth networking is available by chance.

Therefore, it can be conveniently attached to another device if the host computer is equipped with Bluetooth.

As usual, you may also use the standard USB cable to connect the controller to your host computer or screen. Therefore, we might assume that both a wired and a wireless system are the DualShock 3 system.

Could PS3 Controller be paired without USB cable?

Already you have the issue when you first use the PS3 remote. While this Computer is Bluetooth-enabled, Sony found it a little difficult to connect the controller.

In general, all devices activated by Bluetooth may be linked wirelessly to any other Bluetooth unit.

In the case of the PS3 controller, you must first wirelessly plug in the controller into the console or a PC. This is regarded as controller synchronization with the other unit.
So whether you like it or not, you first need to wirelessly attach your PS3 controller with a USB cable.

The cord for the PS3 remote is normal, so you don’t need to use the Flash. Therefore, you will use any regular USB cable, whether you missed the USB cord and have a new console or charge the remote.

Where to attach a USB cable PS3 controller?

The PS3 controller is both a wireless and a wired device, as we previously described. Using a USB cord, you can attach the PlayStation 3 controller to your PS3 console.
Yet you do not assume that you would require the USB cable because of the first moment that the PS3 controller is wirelessly attached to the device.

Yet you can attach the controller wirelessly by utilizing the USB cord, whether you have already wired or coupled the DualShock 3 controller with the console. That is everything I’m trying to say.

Turn on the Computer PlayStation 3: The PS3 controller is then triggered with the system’s PS or PlayStation press. Test that the device is powered enough. It begins flashing with the 4 LED warning lamp.

So the DS3 controller scans for host devices activated by nearby Bluetooth. The PlayStation 3 console is then combined and attached to the computer immediately when you reach it.

Only switch the screen and the controller on and wait for a little before they immediately attach. So you’re wired without a USB cable to your PS3 device.

What is PS3 Controller Reset?

It is confirmed that the PS3 control often starts to fail or is sometimes losing contact. In this scenario, the PS3 controller should be disabled.

A reset button on your PlayStation 3 controller will be given for your knowledge.

The device is positioned next to the click L2. So, locate the reset button and click it like a pin or toothpick on a thin surface. It would reset the PS3 remote. You will then connect the device again with your computer.

Will the PS3 Controller be wired to your PC?

Luckily, on your Windows PC, you can use the DualShock 3 remote, but first, you have to remove the PS3 device. Even still, by using the PS3 remote on your Mac, switch off PS3.
You would, however, require a PC powered by Bluetooth.

Many computers are wired via Bluetooth. You should use a Bluetooth dongle for your Mac, though, if your computer does not have Bluetooth. Also, all the required applications and drivers should be enabled on your Windows:

  • Web System Windows.
  • C++ photo.
  • Installer of DirectX Internet
  • A driver with a PS3 controller
  • Box of SCP Pilot
  • Toolkit for SCP

You can scan the web for more guidance for wirelessly and with a USB cable linking your DS3 device to your Windows PC. Nevertheless, the PS3 controller should be paired with a device.

You can wirelessly use your console using the PS3 controller. Nonetheless, you must first load or connect the USB cable with some other console or computer.

We tried, in this article, to show you how your PS3 controller can be paired with USB cables. More than a few approaches have been described.

The PS3 controller without the USB cord cannot be wired to the PS3 too fast. Nonetheless, you use the USB cable for the first time. And thankfully, a common USB cable is going to do it.

And you have the possibility of using the PS3 controller wirelessly for all new systems or though you have missed the cable you have received.

The PlayStation 3 controller is a flexible twin-stick gaming controller for convenience and ease of use. It’s also branded as the DualShock 3 controller. The key distinction, even though it requires gesture control in video games, is that the PlayStation 3 controller is equipped for portable use like the DualShock 2 system used by the PlayStation 2. Although a mini-USB cable inserted into the console may be used and charged concurrently, a standardized cable link is not needed.

Read Also : Here is How to Turn off PS5 Controller to Preserve Battery Life

PS3 Remote for Wireless Gaming

Thanks to the fact that DualShock 3 contains no cord, consumers may take their connecting ps3 controllers and connect to an inexperienced console on the go, or use their controller to wirelessly play Windows PC games with the appropriate app. There is no reason to worry if you can’t locate a USB cable for the attachment of your device to your computer. You will attach and use it with no cable after syncing a connect ps3 controller to pc once.

System Connections PlayStation 3

The DualShock 3 offers two modes of contact for connectivity and interaction with users. This permits the cable attachment of the two trigger buttons via a mini-USB port at the top of the device. But the device may also be attached with a wireless Bluetooth adapter within the box. When it is attached to a computer (by keeping the PlayStation button in the center of the control), it can function like any USB device and attach it until it has been triggered.

By comparison, the PS3 wireless controller settings don’t require complete wireless connectivity, as compared to Xbox 360 and Nintendo Wii. In other words, the first time you set up a USB cable-no matter whether the device is attached to a new console or to a new machine. For future implementations, though, the device does not require a cable link. Just a few buttons or clicks are required instead.

Wireless PS3 Remote Connection

When the DualShock 3 has been partnered with a PS3 system, it immediately attaches to the computer, when triggered by attaching the device with the USB cord and pressing on the PlayStation button.

The device can be attached by pressing the PlayStation button and waiting, as long as the battery is powered. The top four LEDs – usually used for control number – blink briefly as the DualShock 3 searches for nearby devices. Once the controller locates the PS3, the lights cease and remain on. The unit is then attached to the device and function as normal.

Wireless Windows PC connection

DualShock 3 can be linked to any Bluetooth controlled Windows PC, (or any Windows Laptop with a Bluetooth dongle). It is a Bluetooth-enabled computer that is wireless.

When DualShock 3 is already attached to your Mac, ensure that a Bluetooth signal can be obtained and that the PlayStation button is left down. It should attach to the controller quickly.

Unless the Scp ToolKit software was designed for your DualShock 3, the controller would not operate until activation; otherwise, the system would run on Scp Server before trying to sign in.

DualShock 3 Connections Resetting

When a device refuses to consistently bind, the default settings may be reset and reconfigured. To this, push the reset button on the controller’s foot, use a pin, or likewise a slim topic.

Your controller PlayStation 3, commonly known as “DualShock 3,” will attach to more than just PlayStation 3. This can also be used as a controller for other machines such as computers thanks to its simplicity.

It is because of the simplicity of a PS3 controller. Since the computer is Bluetooth, it can be attached to a Windows PC or MacOS. Nevertheless, the system itself is unluckily tight.

If you’d like to attach your PS3 controller to your PS3 without a USB, claim, you can’t do that without a prior connection.


Sadly, for the first time, a USB cable is mandatory for all ways of linking a PS3 controller. The good news is that you do not require a USB cable, even though a link has been created, to your device. Only push the middle PS button, and you’re good to go.

Read Also:

Leave a Comment